From the Freescale website:
Target Applications:
Comprehensive analog FM radio
Comprehensive digital radio (DMR, P25, TETRA, dPMR)
Dual-mode analog FM and digital voice/data
"Talk around the network" feature for cellular applications
Features
ARM926EJ-S™ MCU operating at clock speeds up to 150 MHz
Modem processor (software-defined radio) operating at clock speeds up to 100 MHz
640 KB of integrated RAM
MCU peripherals to support control and monitoring functions
High-performance integrated RF transceiver supporting RF frequencies of 60 MHz–960 MHz
Fully integrated, high-performance RF fractional-N synthesizer
Integrated 13-bit audio CODEC with analog input/output
Three 12-bit DACs for support functions
10-bit general purpose ADC with four multiplexed inputs
Receiver supports linear modulation
Linear transmit support using integrated I and Q DACs and an external modulator
Advanced Encryption Standard (AES) module for secure communication
Full-speed USB device with integrated PHY
Pretty feature rich! I assume the RF components you need amount to bandpass filtering, preamp, transmit/receive switch, and filtering, power amp for transmit side. This chip implements the SDR conversion, AD/DA conversion, etc. It has an ARM9 CPU and a separate "modem" DSP. I'm unclear if the DSP handles the FM mod/demod and any modem processes such as encoding or decoding PSK, FSK, GMSK, QAM, etc.
This chip is pre-release, according the press release the chip will be available in Q1 2012.
Press Release: http://media.freescale.com/phoenix.zhtml?c=196520&p=irol-newsArticle&ID=1537559
Product Details: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MC13260&tid=vanSoCRadio
Fact Sheet: http://cache.freescale.com/files/rf_if/doc/fact_sheet/MC13260FS.pdf?fr=g
Support Info: http://cache.freescale.com/files/rf_if/doc/support_info/MC13260_TRN_SI.pdf?fr=g
Product Brief: http://cache.freescale.com/files/rf_if/doc/prod_brief/MC13260PB.pdf?fpsp=1
Other chips I've covered include:
CMX7163 QAM Modem
The CMX7163 QAM Modem is a low power half-duplex device supporting multiple channel spacings under host microcontroller (µC) control. Its Function Image™ (FI) is loaded to initialise the device and determine modulation types.
The 7163FI-4.x supports 4-, 16- and 64-QAM modulations up to 96kbps in a 25kHz channel, with channel estimation and equalization to provide robust performance under realistic channel conditions.
Flexible bit rates support a wide range of applications requiring a selectable bit rate and robustness.
An integrated analogue interface supports 'direct connection' to zero IF I/Q radio transceivers with few external components; no external codecs are required.TI CCxxxx series
From my blog post on the Ubertooth One:
A CC2591 2.4ghz PA/LNA,CC2400 2.4ghz RF transceiver and a LPC175x series ARM chip.
What inspired him to use a chip like the CC2400? He previously played around with a kids toy called an IM-ME. It's a pink pager-like device meant for girls to send instant messages over the Internet (via a usb dongle plugged into a computer)... He was able to turn it into aninexpensive spectrum analyzer type device. How? It has a CC1110 chip. This is an RF transceiver chip with an integrated 8051 cpu. According to the linked site:
Frequency range: 300 – 348 MHz, 391 – 464 MHz and 782 – 928 MHz
Pretty neat, it's capable of operation in the 70cm and 33cm bands at up to 500kBaud. This was in a toy that was less than $20 on ebay.
0 comments:
Post a Comment